Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
6" Tall x 46" long loading assist ramps have cutouts to help load a car onto your trailer. Ramps decrease the angle of approach to 8.2 degrees, making them perfect for low-ground-clearance vehicles. Fit tires up to 12" wide.
Features:
Specs:
Race Ramps 45" trailer assist ramps let you easily load a low-ground-clearance vehicle onto your transport trailer without damaging its front end. The ramps extend the length of the trailer's loading ramps using the built-in cutouts.
These cutouts support your trailer door, letting it better match up with the ramp's surface. This allows for a more seamless transition when driving your vehicle up the incline. It also decreases the angle of approach to 8.2 degrees, which will allow you to drive onto the trailer without scuffing or scraping the front end of your vehicle.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs. When loading your car onto a trailer, the ramps can support a vehicle weighing up to 6,000 lbs because they are only ever supporting half of the vehicle at one time.
The 45" ramps are lightweight, weighing no more than 7.5 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
A built-in handle on each ramp makes maneuvering them easier than heavier steel or aluminum ramps. The ramp can also hang vertically to free up storage space in your trailer or garage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jake: Hey guys, Jake here with etrailer. Today we're going to be taking a look at the line of race ramps. These ramps are designed to get your car that might have a low clearance up into your trailer. These are going to be different from the other ramps that you might be using, whether it be steel rams or if you're using wooden blocks. These are going to make it easier, so that you don't have to lug those around, or modify the back of your trailer.One of the things I really like about these ramps is they're going to look really stylish, while being very practical. It's going to have a foam construction, so it's going to be very, very light and easy to maneuver in and out of your trailer.
And it's going to have a nice black finish to it that has a little bit of grip, so that your tires don't slip when you're pulling on in wet conditions.One really nice characteristic about these ramps, is that there's going to be different length and height ramps for many different applications. So depending on your application, you're going to need to take a few measurements to be able to figure out which size ramp will be best for you. The longer ramps are going to be for your lower cars, and then your shorter rams are going to be for those cars that just need a little bit of help to not make contact with your ramp. We do have many different sizes here at etrailer.Here's a good example of the problem we want to fix. Now you'll notice here our angle of approach without our ramps is too steep to be able to get our car in.
Without our ramps we would drag our front bumper on our trailer.To get our ramp in place, we want to set them close, and then lower our gate with the extra overhang ramp folded up, you want to set your ramp down inside this groove, and then push your ramp up to the edge of your gate, and then just fold down your last flat. Now we'll go ahead and get our car loaded up into our trailer.It's also going to help with when unloading your vehicle.When you're all finished using them, they're going to be really easy to store. With this nice convenient handle, you can hook it on to any hook that you might have in your trailer. If you want to put them upright, you have that option. We like to store our shear in line with our wheel wells because we're not using that space anyway.The integrated handles are going to be really nice, because these ramps are black, so in the summertime when the sun is hot, the ramps can tend to get a little hot to be able to hold.
So this gives you an option to be able to transport your ramps without burning your hands.The ramps are going to have a 3000 pound weight capacity when paired with two ramps, but you're going to be able to pull a vehicle that weighs 6,000 pounds into a trailer.Well guys, with that being said, that's going to do it for our look at the line of Race Ramp Loading Ramps.
Average Customer Rating: 4.9 out of 5 stars (21 Customer Reviews)
6" Tall x 46" long loading assist ramps have cutouts to help load a car onto your trailer. Ramps decrease the angle of approach to 8.2 degrees, making them perfect for low-ground-clearance vehicles. Fit tires up to 12" wide.
Race Ramps are great and have worked very well to extend the loading ramps of my trailer to add clearance for low race cars. etrailer has the best customer service and support, this is a dream team. Thank you
Great set of car ramps. It is a big help getting my lowered Firebird in the trailer. Very light weight and easy to handle.
I loaded an unloaded my 5,500# Tesla with ease. Then the race ramps fit the rise in our frontdoor. Guess who gets to see their bikes both track and street all winter long in their front room?
Yep, life is good!
These race ramps solved an ongoing problem where the ramp on our landscaping trailer was too high and short for the zero-turn mower we had. Our previous solutions were heavy/unreliable and required multiple people to implement, so these made it possible for a single person to take the landscaping trailer out with the big mower. They are extremely light weight so our smallest employee has no trouble with them. To prevent them flying off on the road we transport them arranged in a block against the front of the raised ramp and held by a bungee cord. A year later they still look good and are undamaged. The mower wheels have left no visible signs of use. I should say we treat them with respect, so I can't speak to how well they stand up to abuse. Gravel etc. from the road will embed on the underside temporarily, but comes off by itself after the weight is removed and the foam has a chance to recover. I guess my only concern is that it added another thing for me to worry might get stolen off the trailer while mowing, but that is not the ramps' fault. I would buy again.
Your product is superior, but only because of my inaccuracy I bought the wrong ramps for my car and trailer. I have a 2013 427 corvette 60th anniversary also I have 22’ enclosed Legend car hauler trailer. I have to use blocks so my car doesn’t hit. .
Just what I needed to get my drag car in my trailer without draging the nose of my car and hurting my trailer. Thanks race ramps.
The ramps are a very cost effective sol ution!
Makes it easy to load lowered cars onto a trailer.
I have a specialized car hauling business. These ramps made loading the prized possessions into my trailer. Saved many front ends by having these ramps. Thanks "etrailer" for helping me to find which ramps worked best for me. Highly recommend these. (5 Stars)
Peter D.
2/7/2022
Still so glad I bought these. Have helped me out very much. These ramps are a must for people like me with the type of businesses I own.
Very light weight and strong. Allows me to load and unload my race car without having to jack up the tongue of the trailer so the front spoiler does not get caught on the ramps.
Charles R.
2/15/2021
These work great. My race car used to hit the front lip on the ramps. With these lightweight extensions the ramp angle is reduced and the car does not hit the ramps.
Works perfectly. Light weight, grippy material won't slip. Highly recommended.
Douglas
6/10/2019
Perfectly
They do exactly what they are designed to do. Which is to change the trailer door pitch allowing for more clearance. I have used them several times and have no problems, so far
The ordering process was easy and the ordered items arrived quickly and in perfect condition. Overall great service, would recommend, and will use it again myself.
Great product so far. Does exactly what I needed.
Very nice, timely delivers quality prod uct
Great product!
Do you have a question about this Car Ramp?
Condition: Badly Dinged
Notes: ramp is slightly dented at tops of ramps
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Elliott G.
10/19/2019
Perfectly... thanks!